Shredder/Grinder : brighter@chinaplasmachine.com

Pipe Bending Machine:eric.hwang@wonsten.com

Search

You Are Here:Home > Product > Crusher > V Blade Crusher
Wet Plastic Granulator

Wet Plastic Granulator

machine is a waste plastic recycling equipment, waste materials for engineering plastics, crushing the defective plastic, the machine is suitable for crushing all kinds of waste plastic doors and windows, decorative board and foam, as well as for plastic pipe material, profiled materials crushing, adopting deafener low noise power; Adopting removable bits after using blunt grinding can be separately removed; is suitable for crushing all kinds of hard and soft foam....

Send Inquiry Chat Now


plastic crusher.jpg

blade of plastic granulator.jpg


Product Name: claw granulator series

Product features:

1. suitable for the crushing of all kinds of plastic recycling, especially for all kinds of rigid plastic (such as material, shoe material) better.

2. machine is a waste plastic recycling equipment, waste materials for engineering plastics, crushing the defective plastic, the machine is suitable for crushing all kinds of waste plastic doors and windows, decorative board and foam, as well as for plastic pipe material, profiled materials crushing, adopting deafener low noise power; Adopting removable bits after using blunt grinding can be separately removed; is suitable for crushing all kinds of hard and soft foam.

3.PC series granulator convenient operation, simple and quick tool change; optimization design tool, claw type knife can be dispersed by force, cut each piece knife in more suitable for crushing thick material, hard material, material, effectively improve the cutting force, reduce the tool wear, equipped with electric safety design, hopper the double deck filled with insulation material, which has good safety and environmental protection, energy saving and durable.

6 reasons for buying:

use special tool steel refining tool, tool clearance can be adjusted, with blunt, can be repeatedly removed, grinding, durable.

the use of high-strength steel screws fastening blade and knife seat, the carrying capacity is powerful.

Crushing chamber wall insulation treatment, noise is minimal.

Design - separation, hopper, theme, sieve base easily washable cleaning material.

motor set overload protection and power chain protection device, double protection motor and personnel safety.

Design of ladder type knife, the crushing force is strong.

Standard knife holder, suitable for crushing ordinary sheets, pipes, profiles, plates and packing materials and other plastic products and pouring level.

Pro, bought a powerful grinder, might as well with a pair of blades and screen, in case of a rainy day. Often the client machine used for a long time, the urgent need for the blade, the blade is customized, need time, their size and if the amount allowed, the poly you want more, you buy the mill at the same time, prepare a pair, you don't have to worry about the blade is not commonly used will dull our blades can be repeatedly polished, as long as you do maintenance, to use, can be directly out. Screen mesh, you can also choose different aperture, to meet your different needs. New and old customers are now offering razor blades and screen mesh at discounted prices. Welcome to purchase.

Correct use method of granulator

1, granulator and power unit should be installed firmly. If the mill long-term fixed operations, should be fixed in the cement foundation; if the mill is flow operation, unit should be installed in the use made of the base angle, and to ensure that the engine (diesel or motor) and mill pulley groove in the same plane of rotation.

2, after grinding machine installation, to check the fastening parts of the fastening, if loose, be tightened. Check the belt tightness at the same time.

3, before starting the first hand mill, the rotation of the rotor, check the tooth claw hammer, and the rotor is flexible and reliable, in the case of no collision phenomenon, the rotating direction of the rotor and the direction of the arrow machine, power machine, pulverizer lubrication is good.

4, do not arbitrarily change belt pulley, in case the speed is too high, so that the crushing room explosion, or the speed is too low, affecting the work efficiency of the granulator.

5, after grinding machine should start idling 2~3min, no abnormal phenomenon, then throw material work.

6, the work should always pay attention to the operation of the mill, feeding should be uniform, in order to prevent blocking the stuffy car, do not overload work for a long time. If there is vibration, noise, bearing and the body temperature is too high, outward spraying and other phenomena, should immediately stop inspection, troubleshooting can continue to work.

High speed and low noise force

Motor power selection, high design accuracy

1, after repeated experiments and practical use, the results show that the choice of motor power and design of high efficiency matching, so as to ensure the product of low energy consumption, high efficiency and long service life and so on.

Reasonable design, excellent performance

1, the whole body of scientific and rational design, the imported materials and high work efficiency; steel body, compact structure, strong, suitable for operation in the work environment, mechanical performance is stable and reliable, not by the crushing materials for a long time and affected.

2, the separation of design, feed mill main body filter base according to the reference holes assembly disassembly screen.

Low noise, environmental protection, clean and pollution-free

1 equipped with heavy load bearing and design double seal device crushing room, effectively isolate oil pollution, ensure the processing material clean. Unsafe factors resulting from unstable running and excessive motor load to prevent pulverizing powder from entering the mechanical transmission mechanism of the bearing housing.

2, double deck sound insulation device, can effectively prevent vibration and noise, with high environmental protection effect.

3, power consumption, energy saving, high efficiency, simple shape, easy to move.

Seiko carved, superior quality

1, all the parts have set the benchmark for the hole and the surface of coarse and fine multiple machining process, and execute the testing procedures according to strict standards to ensure reliable accuracy of each component, while ensuring the interchangeability of parts, greatly facilitate the use of maintenance products in the process of replacement parts.

Safe and reliable handling

1 separate design, adjust tool protection device.

2 the motor adopts overload protection device and power protection system.

3, after repeated experiments and practical use, the results show that the choice of motor power, design and efficiency of the machine matching is high, so as to ensure the full range of products with low energy consumption, high efficiency and long service life and so on.

Standard knife holder, suitable for crushing ordinary pieces


Hot Tags: wet plastic granulator, China, Chinese, manufacturers, factory, cheap, for sale
Related Products